| HS Code |
Item Description |
| 9818 |
Products for the building, repair and maintenance of locomotives, wagons. |
| 981811 |
Products made of cellular rubber: |
| 98181110 |
Insulated cap |
| 98181190 |
Others |
| 981812 |
Iron or non-alloy steel in the shape or in I, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: |
| 98181210 |
Shape |
| 98181290 |
Figure I |
| 981813 |
Screws, bolts, nuts, square head screws, hanging screws, rivets, locking pins, locating pins, washers (including warping rings) and similar articles: |
| 98181310 |
Screws for metal |
| 98181390 |
Locks and locks |
| 981814 |
Springs and leaf springs, of iron or steel: |
| 98181410 |
Leaf springs and leaf springs |
| 98181490 |
Spring rolls |
| 98181500 |
Air heating and hot air distribution equipment (including those capable of distributing natural or conditioned air), without electric power, fitted with motors or motors, And parts thereof, of iron or steel |
| 98181600 |
Other foundry products, of iron or steel, other than of non-flexible cast iron |
| 98181700 |
Automatic closing mechanism |
| 98181800 |
Other compression-ignition internal combustion piston engines with a capacity of over 100kW |
| 981819 |
Parts used solely or principally with other engines of heading 8407 or 8408 except those for the engines of heading 84.28. Vehicles of heading 8701, 8711 and other vehicles of Chapter 87; Type used for engines of vessels of Chapter 89: |
| 98181910 |
Carburetors and their units |
| 98181920 |
Machine body |
| 98181930 |
Cylinder tube, with an inner diameter of 50 mm or more, but not exceeding 155 mm |
| 98181940 |
Other cylinder tubes |
| 98181950 |
Slips and slides |
| 98181960 |
Piston, of an external diameter of 50 mm or more but not exceeding 155 mm |
| 98181970 |
Another piston |
| 98181990 |
Others |
| 981820 |
Liquid pumps, not fitted with measuring tools: |
| 98182010 |
Water pump by hand |
| 98182021 |
Water pump or fuel pump, for piston internal combustion engine:Type of centrifuge |
| 98182029 |
Others |
| 98182031 |
Single-stage, single-suction, single-stage water pumps are driven by belt or direct coupling, except for coaxial pumps with motors:With no more than 200mm inlet diameter |
| 98182039 |
Others |
| 98182090 |
Parts of pumps of subheading 8413.70.11 and 8413.70.19 |
| 981821 |
Other fans of a capacity exceeding 125kW, excluding table fans, floor fans, wall fans, window fans, ceiling fans or roof fans, with electric motors attached to a capacity not exceeding 125 W: |
| 98182110 |
Air blower |
| 98182121 |
Others:There is a protective net |
| 98182129 |
Others |
| 981822 |
Air-conditioners used for track vehicles: |
| 98182211 |
Accompany the chillers and a reversible hot water reversal valve (reverse heat pump):Capacity not exceeding 26.38kW |
| 98182219 |
Others |
| 98182220 |
Air conditioners, other, fitted with cooling units for rail vehicles, of a capacity exceeding 26,38kW |
| 98182231 |
PartThe machine has a cooling capacity of over 26.38 kW but not exceeding 52.75 kW, with an air flow through the evaporator no more than 67.96 m3 / min. |
| 98182239 |
The machine has a cooling capacity of over 52.75 kW, with an air flow through the evaporator no more than 67.96 m3 / min. |
| 98182300 |
Other refrigerating or freezing equipment, other than: refrigerators, beverages, drinking water, water chillers of a capacity of over 21,10kW and scabbler |
| 98182400 |
Heat Exchanger, except for cooling towers |
| 98182500 |
Other automatic data processing machines, other than personal computers and laptops |
| 98182610 |
Safety valve or drain valve:Plastic, with an inner diameter of 10 cm to 25 cm |
| 98182690 |
Other, other than copper or copper, with an inner diameter of 2.5 cm or less |
| 98182700 |
Ổ Taper wand, including clutches and cone worm gear |
| 98182800 |
Transmission shafts (including camshafts and crankshafts) and other handpieces |
| 98182900 |
Other sets of gears and gear assemblies, other than toothed wheels, chain drives and movable parts in separate forms; Screw ball or screw chopsticks; Gearboxes and other accelerator mechanisms, including torque converters |
| 98183000 |
Similar gaskets and gaskets are made of thin metal plates combined with other textile materials or of two or more metal sheets |
| 98183100 |
Generator sets with spark-ignition internal combustion piston engines of a capacity exceeding 100 kVA but not exceeding 10,000 kVA. |
| 98183200 |
Parts including the printed circuit board of the telephone plug; Connectors and connectors for wires and cables; Probe flat plate wafer prober, for voltage not exceeding 1,000 V |
| 98183300 |
Brush |
English
Tiếng Việt